VIVOSUN 2600 GPH Submersible Water Pump 120W Ultra Quiet Pump with 20.3ft Power Cord HIgh Lift for Pond Waterfall Fish Tank Statuary Hydroponic
jackgarden • 5 years ago
Product Features
SOLID CONSTRUCTION: The shaft and drive ring piece are made from silicon carbide material, reduce the attrition and increase the service life.IPX-8degree
ENERGY SAVING WITH LOW NOISE: Ultra-quiet operation design(30-40db).Less power (120W)consumption with high output(2600GPH/9200LPH) which compared to other pumps
HIGH LIFT WITH DETACHABLE FILTER: Lift height can be up to 14.8FT/4.5M.This pump can more than accommodate your water features with portable handle and detachable filter
EASY INSTALLATION: Adjustable outlet direction and 20.3FT power cord, to meet different requirements.Flexible Tube Size: 1″ or 1 1/4 ID. It can be worked with filters (filter system) together
Multiple usage: VIVOSUN Fixed Flow Rate pump can be used as submersible or inline.It’s great for a variety of application in pond, fish tank, fountains, waterfalls, hydroponic systems, irrigation systems
Great pump with fine tuning Great air pump. After reading the reviews complaining about the heat generated by the air pump, I fine tuned the air pump. What worked for me was to add brackets to the base of the air pump. These brackets hold a floating fan just 3-4″ below the air pump. The fan points at the air pump, and keeps it constantly 20-25°f cooler than its uncooled operating temperature of 105-115°f. I have 3 air pumps, all with fans and brackets, they all stay around 81-85°f. I hope this helps some other…
Plenty of output, piston driven, no cooling fans needed, comes with a metal manifold and fittings! I bought this for a two-fold purpose:1. To use with my laser engraver2. To use with my hydroponics setupMy laser engraver requires high volume at low pressure which this pump can supply. I ran the pump for about 5 hours straight and it kept up without any issue. If you have ever used a piston air delivery pump, they are louder than diaphragm pumps, but they last much longer and can produce more output than them. In fact, I was sick of replacing diaphragms on my old…
){kind=link}
VIVOSUN 1600 GPH Submersible Water Pump100W Ultra Quiet Pump with 20.3ft Power Cord High Lift for Pond Waterfall Fish Tank Statuary Hydroponic
Great pump with fine tuning Great air pump. After reading the reviews complaining about the heat generated by the air pump, I fine tuned the air pump. What worked for me was to add brackets to the base of the air pump. These brackets hold a floating fan just 3-4″ below the air pump. The fan points at the air pump, and keeps it constantly 20-25°f cooler than its uncooled operating temperature of 105-115°f. I have 3 air pumps, all with fans and brackets, they all stay around 81-85°f. I hope this helps some other…
Runs super quiet now
Plenty of output, piston driven, no cooling fans needed, comes with a metal manifold and fittings! I bought this for a two-fold purpose:1. To use with my laser engraver2. To use with my hydroponics setupMy laser engraver requires high volume at low pressure which this pump can supply. I ran the pump for about 5 hours straight and it kept up without any issue. If you have ever used a piston air delivery pump, they are louder than diaphragm pumps, but they last much longer and can produce more output than them. In fact, I was sick of replacing diaphragms on my old…
Comments are disabled for this post.