The Tetra Pond Debris-Handling Pump provides clog-free performance for pond filters, waterfalls or streams. It features a pre-filter cage that prevents leaves, sticks and other large debris from entering the unit, and also protects fish from the pump’s impeller. This powerful, energy-efficient and UL listed pump is engineered for continuous operation and can handle debris up to 1/4 inch in diameter – allowing you to clean your pond, not your pump! This pump is engineered to circulate large volumes of pond water without clogging, which allows the pump to operate for long periods of time without any maintenance. Water, dirt and debris are drawn through the quarter-inch holes in the large pre-filter cage that surrounds the pump. Pond water with dirt and debris are pumped to an external filter for removal or directly to a waterfall or stream. Since 1951, Tetra has developed the world’s most comprehensive body of fish food knowledge, and fishkeeping enthusiasts have looked to the brand for products and solutions that add ease and beauty to their home. Whether you’re an experienced hobbyist or just starting out, Tetra has everything you need – from a large variety of quality fish food and innovative equipment to test kits and decor.
Clog-Free Performance
The TetraPond Debris Handling Pump provides clog-free performance for power filters and waterfalls. This energy efficient pump is engineered for continuous operation and can handle debris up to ¼ inch in size—allowing you to clean your pond, not your pump!
Max Flow | Max Pumping Height | Pond Size | |
---|---|---|---|
DHP 3600 | 3690 GPH | 11.4 Feet | Up to 3000 Gallons |
DHP 4200 | 4235 GPH | 13.1 Feet | Up to 4000 Gallons |
How It Works
TetraPond DHP pumps are engineered to circulate large volumes of pond water without clogging. This allows the pump to operate for long periods of time without any maintenance. Water, dirt, and debris are drawn through the quarter inch holes in the large pre-filter cage that surrounds the pump. The pre-filter cage prevents leaves, sticks, and other large debris from entering the pump. It also protects the fish from the pump’s impeller. The open-face impeller allows debris up to 1/4 in. in diameter to pass through the pump without clogging. The pond water with dirt and debris are pumped to an external filter for removal or directly to a waterfall or stream.
Flow Performance
Determine how high you waterfall will be from the pond surface. The higher the top of the waterfall is from the pond surfaces, the less flow will result. Take a look at the charts below for the approximate waterfall effect the DHP pumps will create at various pumping heights.
Debris-Handling Technology
- Rugged Debris Handling Pump impeller can pass 1/4 in. debris without clogging
- Large basket minimizes blockage and maintenance
- Energy-efficient unidirectional impeller and motor
- Wear-resistant and anti-corrosive ceramic shaft for longer life
- Epoxy encapsulation protects motor from water intrusion
- Outlet size fits tubing 1-1/2 inches or 1-1/4 inches in internal diameter
- 15 foot electrical cord
- 120 VAC, 60 Hz
Pond Tips
Pond Circulation: Choose a pump that will circulate 100% of the pond volume in one or two hours. More circulation will result in better pond conditions.
Filters: Be aware that filters reduce the flow to waterfalls and streams. The image on the left shows water pumped at three feet without any filter restriction, while pumping at three feet with a TetraPond pressure filter reduces flow by about 45%.
Product Features
- CONTINUOUS-OPERATION POND PUMP: For powering pond waterfalls and streams with rugged debris-handling impeller that can pass debris up to 1/4 inch in diameter.
- CLOG-FREE PERFORMANCE: Large basket minimizes blockage and maintenance.
- ENERGY EFFICIENT: Unidirectional impeller and motor.
- WEAR-RESISTANT: Motor has anti-corrosive ceramic shaft for longer life.
- SIZED FOR YOUR POND: For ponds up to 4,000 gallons.
A true workhorse.
Very energy efficient and not overkill for smaller ponds! I was a little hesitant purchasing this Tetra 3000 gph pump for my sitting-garden pond, but I’m glad I did!My pond is small. It is only 6×5 1/2x 24.I thought this pump would be overkill, but the waterfall sound it produces was putting me and my family members to sleep!Not kidding. Wow, I’m so pleased with the way this pumps, pushes and flows my pond water through the spillover and spillway!I was also concerned how much this large pump would cost me to run. I found out…
Great Pump. So far. Time will tell. Working great. Wish it took one inch tubing. Had to play with it. Jerry rigged it. Not clogged in the two weeks running. I am going to rinse soon though. Keep off bottom. I have to say it can move debris. I have a heavily planted pond that gets oak leaves. I pull out leaves in spring and really stir things up. This pump is handling muck so far. Needs cleaning now though although water exit has not slowed from filter. Allow for one inch diameter tubing and would be perfect for me. Had…
Comments are disabled for this post.