){kind=link}
Adjustable Steel Gate Kits For Single Or Double Wood Gates – Install your own wood rails and pickets. Straight across the top, arched, convex, or concave.
Steel Gate Kit Features:
• Adjustable Widths – Uses a unique sleeve system to adjust the gate to fit the opening.
• Adjustable Truss Cable – Installs diagonally across gate frame to prevent sagging.
• Steel gate kits for 3 to 16 feet wide gate openings
• Fits gates 4, 5, or 6 feet high
• 1-1/2″ galvanized steel square frame, .045″ wall thickness
• Powder coat finish ensures longer-lasting finish
• Adjustable anti-sag diagonal truss cable
• All hardware & screws included (gate hinges & latch)
• Hinges tested up to 3000 lbs. per hinge before bending
• Kits uses a unique sleeve-system that allows the gate to be adjusted to fit the gate opening.
• Can be used as a single OR double swing gates
• Wood NOT included
Product Features
- Adjustable frame and truss system for quick installation with professional results for almost any application.
- All steel frame prevents sagging and dragging.
- All galvanized steel with UV powder coating finish.
- Create a double drive gate using two Adjust-A-Gate systems.
- Industry leading consumer packaging.
Related posts:
Adjust-A-Gate AG 36-3 3-Rail Contractor Quality Gate Kit, 36-Inch to 60-Inch by 60-Inch Height
Adjust-A-Gate AG 60-3 3-Rail Contractor Quality Gate Kit, 60-Inch to 96-Inch by 60-Inch Height
Adjust-A-Gate AG 36-36 2-Rail Contractor Quality Gate Kit, 36-Inch to 60-Inch by 36-Inch Height
Adjust-A-Gate AG 72 2-Rail Consumer Quality Gate Kit, 36-Inch to 72-Inch by 45-Inch High
Adjust-A-Gate CL 031630 48-Inch H Adjustable Walk Gate Kit
Adjust-A-Gate CL 031631 60-Inch H Adjustable Walk Gate Kit
The only issue I have with this is that it can only be an inswing. Or at least that is what it says. I mounted it as an outswing and it seems to work. I had to use different hinges, but that was all. The instructions don’t tell you the correct way to put the cable clip on (never saddle a dead horse) and they need to include a thimble with the cable clip. In general a good product.
I have a 62 inch opening off my deck that I needed to install a swing gate to retain my dog. One side of the opening is the house; the other is a 6×6 vertical post. The adjust-a-gate installed on the 6×6 post with ease and swings effortlessly. This is a engineering marvel. I was looking at doing the gate in wood but the stress on the hinges would have been too much for the length. I even thought of putting a caster on the bottom of the gate to help with the weight. I decided to go with the adjust-a-gate instead and it’s worth every penny. Easy to install – just make sure you have the right sized drill bit. I finished mine with vertical spindles (1/2″ x 1″) and installed a cross beam to cover the wire (I used a wood router to carve out for the turnbuckle and clamp). I will be ordering two more for my dog pen.
Comments are disabled for this post.