Ambient Weather WS-10 Wireless Indoor/Outdoor 8-Channel Thermo-Hygrometer with Three Remote Sensors

jackgarden • 8 years ago

Additional Features:
The scroll mode allows you to view the indoor thermometer/hygrometer and remote channels without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals.

Each remote sensor includes dip switches for channel selection and units of measure (degF vs degC).

The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries.

Features:
Indoor/Outdoor temperature & humidity
Outdoor temperature range: lithium batteries: -40°F to 140°F
Outdoor temperature range: non-lithium batteries: -4°F to 140°F
Indoor/Outdoor Humidity range 10% to 99%
Rate of change indicators
Scroll mode automatically displays each sensor every 5 seconds
Dip switch selectable remote channels
Re-sync mode if sensor reception is interrupted
Min/Max Memory for indoor/outdoor temperature & humidity
Monitors temperature and humidity in up to 8 remote locations
Includes three remote sensors (F007TH) – transmission range of up to 300 feet line of sight (100 feet under most conditions)
Frequency: 433 MHz
Update Rate: 60 seconds
Console Dimensions (LxHxW): 4.50 x 5.0 x 1.00 in
LCD Dimensions (LxW): 3.75 x 3.50″
Power requirements:
Main Unit – 4 x AAA (not included)
Remote Sensor – 2 x AAA (not included)

Product Features

Simple to read, simple to use, and affordable, the WS-10 includes an indoor thermo-hygrometer inside the console, and three remote thermometer-hygrometer sensors (F007TH), which are all displayed at the same time.
The display console can remotely read and update up to eight remote thermo-hygrometer sensors.
The console includes audible and visual alarms when temperature and humidity exceed your pre-set minimum and maximum alarm settings.
The WS-10 includes three remote thermometer-hygrometers, and five additional sensors can be added (F007TH, F007TP, F007T, F007PF) for comprehensive monitoring.
The console displays temperature and humidity, minimum and maximum temperature and humidity, which can be manually reset.

Lynne E. says:

November 18, 2015 at 11:37 pm

Keeps Track of Temperature, Humidity in Four Locations Within 100-Foot Wireless Range Out of the box, this AMBIENT WS-10 WIRELESS INDOOR/OUTDOOR THERMO-HYGROMETER will continuously display the current temperature and humidity in four different locations inside and outside your home. The square master console displays the temperature and humidity of the room it’s located in, and also the readings that are wirelessly broadcast by the three small indoor/outdoor sensors you place at other locations within a range of about 100 feet. (To monitor eight…

Ted says:

November 18, 2015 at 11:49 pm

No frills, works just like it says. UPDATED. Easy to read and easy to use. I like how all of the remotes come pre-configured and everything uses AAA batteries. This is a no frills unit that simply tells you the temp and the humidity levels on each remote. Overall, I am quite pleased with the unit.Update 1/1/2014:For some reason all of the sensors drop out all of the time. Usually it is one at a time and sometimes it comes back, most of the time I do a battery pull on the main unit and it finds them again…

Altar Boy says:

November 18, 2015 at 11:59 pm

Works as advertised I was skeptical about the ability of the WS-10 Ambient Weather Wireless Thermo-Hygrometer to handle 3 remotes that are positioned indoors and outdoors and separated by concrete block walls. I have two other thermo-hygrometer systems, one made by La Crosse Technology and the other made by Acu-Rite. One is a wireless monitor system that has two remotes (one wet and one dry) and interfaces with the internet to enable you to remote monitor on you smart phone. Very nice but requires an annual…

Comments are disabled for this post.

Search This Site

Recent Pins On Pinterest

Categories