Speciation

Solar Panel: 2V, 0.26W

Li-ion Battery: 1.2V, 600mAh

LED: 6PCS

Charge Time: 6 hours

Working Time: 6-8 hours

Material: ABS

Waterproof: IP65

Net weight: 134 g

Product Size: 9 x 5 x 6.5 cm (L*W*H)

Operation Instructions

Step 1 unlock and activate the solar light

Since the internal Li-ion rechargeable battery is locked from factory for safety shipment, therefore it is important to open the lampshade and then to click the “ON/OFF” button to turn on the light.

Step 2 choose a good location

The lamp is solar powered, a good location that facing south can guarantee the solar panel access to the strong sunlight directly without any shelter or glass in order to fully charge the device.

Step 3 mounting the solar lamp

Place the solar LED lamp in the location where needs light. Using a pencil or felt tip marker, mark the placement of hole of solar led lamp. Choose a drill bit appropriate and drill the point where it is marker. Gently hammer the pillar-hinge into the hole and fasten the screws. Tighten the mounting screw securely.

Tips

1.Remove the protective film from the solar panel; 2.Fully charge; 3.Make sure turn on power switch; 4.Place or install the solar lamp under the sunlight without any shade; 5.Solar panel can charge quicker under strong sunlight. It may cannot charge or charge slowly under weak sunlight. The charging time depends on the sunlight intensity; 6.During of lighting depends on the intensity and time length for sunlight.

Package List:

Solar Light x 2

Installation Screw x 4

Expansion Pillar-hinge x 4

User Manual x 1

Share Button