This strainer cover is designed to use with Hayward Power-Flo LX SP1580 pump series models SP1575LX, SP1580, SP1580X15, SP1520UN, EP1500LX, SP1680 and also compatible with Hayward Power-Flo II SP1700 pump series models SP1705, SP1710, SP1711, SP1720, SP1725, SP1750, SP1775, SP1780, S166T1580S. Fits Power-Flo SP1500 series pump and strainer models SP1500, SP1510, SP1511, SP1550, SP1575, EP1500, SP1516 and also fits Hayward Easy-Clear, Perflex and Pro and VL Series filter models C5501575XES, EC301540ESNVTL, S144T1540S. Includes o-ring. Weighs 7.9-Pound.
Product Features
- Strainer cover replacement
- Fits hayward power-flo lx sp1580 pump series models sp1575lx, sp1580, sp1580x15, sp1520un, ep1500lx, sp1680
- Also fits hayward power-flo ii sp1700 pump series models sp1705, sp1710, sp1711, sp1720, sp1725, sp1750, sp1775, sp1780, s166t1580s
- Also compatible with Power-Flo SP1500 series pump and strainer models SP1500, SP1510, SP1511, SP1550, SP1575, EP1500, SP1516
- Also compatible with hayward easy-clear, perflex and pro and vl series filter models c5501575xes, ec301540esnvtl, s144t1540s
Replacement cover for pool pump The new cover fit great, bought and applied the grease recommended for the o-ring as recommended (never did with the old cover) noticed after less the a month the new o-ring broke. And also noticed that with the grease the cover goes on easy but still comes off as hard as it did with the old cover with no grease. Thank goodness I kept the old cover with the o-ring or else I would have been buying a new o-ring. The o-ring was really my biggest complaint, especially after buying their expensive…
Perfect replacement for my pump/strainer Perfect replacement for my pump/strainer. Only problem I found is that after removing this new cover for the first time after being installed a couple weeks the rubber seal that came on it seemed to be stretched and would not fit properly back into the strainer, so I had to shut down the pump and order replacement O-rings (from Amazon). When the new O-rings arrived I was back in business. Replacement seemed to be slightly thinner rubber but made a great seal that doesn’t leak and the pump…
Fantastic I was having issues with my old cover and decided to replace it with this one. This new cover (quite surprisingly) works 10x better than the old. The problem that I was having w/ the old cover was that it was worn and not sealing against the strainer body well anymore, tried replacing the o-ring and that didn’t fix it. This new lid not only seals off great, but somehow it has changed the “swirling” action of the water in the strainer body. So where I used to have a fairly large air bubble…
Comments are disabled for this post.