Extra tall 30″ high 6 panel Superyard creates a safe, portable play area for young children and pets- encloses 10 sq. ft. Includes one gate panel with childproof double locking system. Metal Superyard sits on carpet,tilee, hardwood floors. Rubber pads prevent scratching. Easy to setup, take down and store. May be used for pets.For households with little ones and pets, the North States Superyard Metal 3 in 1 is the perfect combination of portable play yard and safety barrier. Constructed with a strong powder-coated metal, the gate can be used to create an enclosed recreation area or it can be set-up as a barrier to block off potentially unsafe areas. Suitable for indoor use, the durable gate is easily set-up in under a minute.
|
 |
 Create a barricade for potentially unsafe areas like fireplaces. (Click each image to view larger.) |
A Safe and Sturdy Indoor Play Yard
Whether you need a temporary play space for your children or small pets or a reliable barricade for potentially unsafe areas such as fireplaces and stairs, the Metal 3 in 1 Superyard is up to the task. This play yard’s sturdy structure allows you to rely on it as a safe space for both infants and small pets, so you can multitask or relax while they play.
For added security, the play yard’s one swinging walk-thru panel is built with a child-proof double-locking system. This proprietary safety feature allows you to easily enter and exit the play yard while keeping you assured that your little one can’t escape without your assistance.
Flexible Design Enables Multiple Uses
Unique for its sheer versatility, this play yard includes six metal panels that can be set up in a wide variety of configurations. Weighing 43 pounds, the structure is solid enough that it won’t tip or lean and lightweight enough to be moved from room to room. Set it on carpet, tile, or even a hardwood floor — it includes rubber pads to prevent scratching.
Capable as an enclosed gate or a barricade, its 30-inch high panels can be connected to create an ample 10 square feet of space, or they can be put together as a barrier using the included mounting hardware to extend the width up to 144 inches.
If you’d like to extend the gate’s overall diameter, consider purchasing a two-panel extension kit (sold separately), which increases the play space to 19 square feet.
Easy to Assemble and Adjust
Setting up the Metal 3 in 1 Superyard is hassle free. The six interlocking panels are pre-connected–simply pull the panels out of box, unfold and connect them together, and the Superyard is ready for use. To put away, simply disconnect one panel, fold together, and store. The Superyard is so easy you can set it up and take it down in under a minute. The hassle-free panels also give you quick and convenient access to your child or pet.
For example, if you want to reconfigure the panels to block off different areas at the same time, you can easily do so. Thanks to the flexibility of the Superyard’s design, you can use a few panels to create an enclosure around the stove while dinner’s cooking, then use another panel and the included wall-mounting hardware to create a small-scale barrier around a staircase.
To ensure 100% satisfaction with your purchase, all North States products come with a one year warranty against manufacturer’s defect.
About North States
Located in Blaine, Minnesota, North States Industries offers versatile and economical gates and enclosures in the juvenile and pet categories. All of the company’s products are certified by the Juvenile Products Manufacturers Association for safety, and are engineered to provide the highest quality, durability and ease of use.
What’s in the Box
North States Metal 3 in 1 Superyard with six metal panels, hardware, and assembly instructions.
 The child-proof double-locking system keeps your children safe. View larger. |
Product Features
- Comes with six removable and adjustable panels and extends to 144″ wide. Space between the bars is 2.25 inches
- Heavy-duty metal unit includes one swinging walk-thru panel with a child proof double locking system for added safety
- Metal Superyard is a great playard or play area for your young toddler or small pets, both indoors and outside
- Allows you to extend out as a large extra-wide barrier
- Rubber pads prevent scratching
){kind=link}
Solid product with one stupid design flaw First, I want to say I have not yet completely installed this product but I like it already. The gates themselves are solid. They have nice bumper pads on the bottom so as to not scratch the wood floors in my home. The gate itself is extremely safe but a little difficult to open. If you have looked at other gates you will often find ones of parents complaining that their toddler figured out how to open it on their own. That would be extremely difficult here as it has a locking button that must be pressed before the gate is then lifted to be opened. The gate only swings one direction which is too bad and could’ve been fixed with a different style hinge. That sections themselves can be pressure locked into place, making this a very stable play-yard/large gate for your home. Sections can be easily lifted out and removed or added back in. This thing is very versitile in terms of configuration. BUT it has one really stupid design flaw that can be fixed by the consumer but should’ve just been done by the manufacturer in the first place.THE FLAW:The gate sections interlock at the hinge and then are held into place by screwing in a support bar. At each hinge, there is one side that goes up and ones side that goes down (male and female for simplicity’s sake). Thus you need one male and one female hinge to fit together for the sections to interlock. The other aspect to this is that if you are hooking the play-yard up to a wall or you are using this as a large gate, the top bracket to hook this to the wall is also male or female (you get one of each in the box). The final piece to this is that rather than making each gate section have one female and one male hinge piece on each side, the company decided to make each gate section have two male or two female hinge pieces. Because they did this, it limits the configuration that you can easily do out of the box. For me, I want to use this as a gate with only 5 sections instead of six which made it so the exposed ends to fit in the wall bracket were both female… but I get one female and one male wall bracket… Likewise, if you were to buy the two section expansion for this product but only want to use one section, you would run into the same problem. Note that this will only effect those that intend to use an odd number of gate sections!!!On a related note, the reason for this could be that the hinge piece are not “ambidextrous.” Meaning that they can fully fold in on each other one way but not the other (you are limited to a little larger than 90 degree angel I believe). So, the above issue might be there so that the gate can fold up all neat and nice to be stored. If that is the case, I supposed it makes sense…THE FIX:The hinge pieces are held in place by a single screw on the bottom of the gate section. You can simply unscrew these and swap them out with the gate piece you don’t intend to use. This took me only a few minutes but it took me a while to figure it out at first. If the above reason I am theorizing is correct, the manufacturer could’ve simply thrown two of each top bracket in to save the consumer a lot of trouble. This would not help those making this into an enclosed playyard using an odd number of gate sections but I have a feeling that issue is a lot less prevelent and a lot easier to simply cope with.In the end, this is a solid product and much cheaper than some of its competitors (like the Kidco Configure Gate which is about twice as much for the same number of gate sections). Highly recommended.
Solid product, and a snap to install We installed this product along an L shaped wall to create a play area for our 19 month old. The area is about 32 sq feet in size, and accommodates a small table with 2 chairs, and several of his toys. The installation took less than 3 hours, and that was with my 19 month old “helping”. Without his “help”, it would have been a couple hours at the most.The product was fairly easy to install, just be sure to install the screws into the studs behind the drywall, or use some heavy duty drywall anchors if that is not an option. We have used this gate only for about a week now, so there’s not much I can say for durability just yet. However, the first impressions are good. The product looks solidly built, and can be easily to set up to any shape or design you’d like without the need for even a screw driver (apart from the ends that are secured to the wall).I would have given it 5 stars rather that the 4 I gave it, if it weren’t for the door. The door does not swing open a full 180 degrees, it only opens 90 degrees. My son have already started pushing on the open door, and I suspect that it is only a matter of time before it will either break off or come apart. Then again, I could be wrong, and it might be sturdy enough to survive the abuse; only time will tell.[Update on 05/14/08] After several months of use, my (positive) opinion of this product has not changed. In addition, my worries about the door have so far been unfounded. The door has survived the abuse from my son without any problems. At this point I would gladly rate this product with 5 stars, unfortunately it does not look like there is a way for me to update my initial rating.
Not a bad gate but…. We bought this gate a few days ago to replace another extra wide gate our son broke through after one year. Our previous gate was a Summer Infant Sure and Secure Super Wide Gate. It was a nice gate but the fabric/mesh design was not strong enough and the fabric/mesh over the gate’s door was secured with velcro. Once our son found out about this he would just undo the velcro and walk through the door.So we decided to go for an all metal gate and went with this one based on some positive reviews. Overall it is a good gate but I would warn you of the following:1) The instructions were not very good at all. They were minimal at best and could have been better thought out.2) If you want to mount it to a wall as we did, then the B Side upper mount should be threaded in order to create a better connection like all the other threaded upper mounts. Why would they leave this most critical piece without a threaded top? It made no sense and one of our mounted sides is only secure because of a pressure mount. If you mount yours to a wall you’ll know what I’m referring to when you try to mount it.3) The door to this gate has a very flimsy locking mechanism and I’m not sure how long it will last with daily use. We’re keeping our fingers crossed and will update this when it goes.
Comments are disabled for this post.