PONICSPUMP 211 GPH SUBMERSIBLE PUMP DESIGNED FOR LONG SERVICE LIFE

We designed this 211 Gallon Per Hour (GPH) pump to have a long service life by:
• Using aluminum oxide ceramic shaft and bearings which have 3 times the hardness of stainless steel,
• Using a powerful permanent maget wet rotor design that eliminates the need for a seal, which is a common cause of failure, and by
• Using a heavy duty waterproof electric cord design to resist oil, grease and moisture while providing abrasion resistance.

Comes with a one year limited warranty.

NEED HELP IN CHOOSING A PUMP?
Please see our guides and specifications in the photo section above.

NEED HELP IN CLEANING YOUR PUMP?
Please see our disassembly / re-assembly guide in the photo section above.

Product Features

  • COMPLETE SELECTION: We have 9 sizes & 19 models. Click on “PonicsPumps” under the title at the top of the page to see them all. This model comes with an attached high quality 16 FOOT WATERPROOF CORD. Comes with adjustable input flow-rate screen and 2 outlet adapters for 1/4″ & 1/2″ inside diameter tubing.
  • DURABLE QUALITY: Our Polished Aluminum Oxide Ceramic Impeller Shaft and Bearings insure long pump life because they are non-corrodible with hardness more than 3 times that of stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts. This pump incorporates a magnetic wet-rotor design, so there is no seal to fail that would damage the pump motor.
  • EFFICIENT: Neodymium Iron Boron (NdFeB) Magnets are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency. Water-Lubricated Nitrile Bushings are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting.
  • SAFE & EASY: Safe for fish with no exposed copper and oil free. Easy to clean with no tools required to disassemble and clean filter/impeller. Our SJTW Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.
  • SPECIFICATIONS: Salt or fresh water ready with flow Rates of 211 Gallons Per Hour (GPH) @ 0′ Lift; 192 GPH @ 1′ Lift; 167 GPH @ 2′ Lift; 139 GPH @ 3′ Lift; 86 GPH @ 4′ Lift; Max Lift – 4′ 3″. Dimensions are 2.89″ x 2.05″ x 2.46″. 120VAC – 12 WATTS – 60Hz. 1 year limited warranty when sold by PonicsFarm.

Share Button

Related posts:

Default ThumbnailPP21105 : 211 GPH, Submersible, Hydroponics, Aquaponics, Aquarium Pump – 12W Default ThumbnailPP80016: 800 GPH Submersible Pump, High Lift, Waterfalls, Vertical Hydroponics/Aquaponics, 60W, 16′ Cord Default ThumbnailPP40016 : 400 GPH, Submersible, Aquaponics/Hydroponics/Fountain/Pond/Aquarium Pump – 16′ Cord Default ThumbnailPP09205: 92 GPH, Submersible, Hydroponics/Fountain/Pond/Statuary/Aquarium Pump – 5′ Cord Default ThumbnailPP80006: 800 GPH High Lift Pump, Waterfalls/Ponds/Vertical Hydroponics/Aquaponics – 6′ Cord Default ThumbnailPP12005 : 120 GPH, Submersible, Hydroponics, Aquaponics, Statuary Pump – 6W