RAB Lighting super stealth 360 sensor with twin precision die cast H101 deluxe shielded bell floods pre-wired and assembled on universal CU4 EZ plate. Accepts PAR-38 lamps, 150 watt max. Lamps not supplied. UL listed: Suitable for wet locations. Surge protection: Withstands up to 6000 volts. Voltage: 120 volts AC 60 Hz. Time adjustment: 5 seconds to 12 minutes. Senses 180 degree and 360 degree down for Total Detection. Power consumption: 1 watt. Photoelectric control: Deactivates lights during daylight. Fully adjustable for 24 hour operation or custom applications. Switching capacity: 8 amps, 1000 watts incandescent at 120 volts. RF immunity: Circuits fully shielded for maximum radio frequency immunity. No extra wiring needed. Advanced detection logic: Minimizes false triggers. Color matched lens: Dark lens with bronze units, white lens with white units. Temperature compensation: Sensitivity adjusted automatically for consistent detection in hot and cold ambient temperatures. Wide sensitivity control: Adjustable from 100%to 30%. Evening timer: Keeps lights on for 1-8 hours after dusk. Then sensor is motion activated until dawn. Scanning leds: 3 LEDs continually scan back-and-forth. Set it and forget it: STL360’s full coverage pattern reduces need for aiming and adjustment. Customized press apply lens mask included to reduce coverage easily. Patents: RAB sensor and fixture designs are protected under U.S. and International Intellectual Property laws.
Product Features
- Senses 180 degree out + 360 degree down for total detection
- Scanning LED’s
- Radio frequency immunity; 6000 volt surge protection
- 1000 watt switching capacity
- Pre-wired and pre-assembled on CU4 universal EZ plate; protected manual override with auto reset; can be wired in parallel
Let There Be I’ve been waiting a year to review this floodlight so that I could get a pretty good feel for it, and here’s what I’ve found:* Installation was a breeze, as the casing fits round, square, octagonal, recessed and surface boxes, and the unit is pre-wired and pre-assembled on a CU4 universal EZ plate. The unit is die-cast aluminum; the casing is watertight, and the finish has shown no signs of dulling.* Using the Photoelectric Control that deactivates lights during daylight, I…
Awsome light I have 2 of these units. They are a little expensive, so I put 1 up to try it a year ago and liked it so much I purchased another and put it up last week. I have installed quite a few motion lights for myself and relatives, and these are the most reliable and effective hands down. They come with a heck of a warranty and they work exactly as advertised. My wife now wants our sconce lights on the front of our garage to be motion activated, so I will be wiring this sensor in minus the flood…
THE BEST security light on the market. 0
Comments are disabled for this post.