Specifications: Maximum output: Approx. 1600 GPH inlet/outlet hose adapter: 3/4″, 1 1/4″ dimensions: Voltage: 110-120v 60hz UV power: 13w suitable for ponds with small mix of fish and koi up to: Approx. 900 gal suitable for decorative ponds up to: Approx. 1600 gal the CPF-pressure pond filter series is among the latest generation of pond filters, combining in a compact system, a high-performance bio-mechanical filter along with the most modern UV technology. The filter is unremarkably dug in at the edge of the pond. The compact way of construction makes the pond technology almost completely disappear. Any and all connections as well as the whole field of technology are found in the top cover. The pond filter can be dug in without any problems. The pond water can be pumped to higher-located waterfalls and from this point return into the garden pond. The pressure pond filter ensures a stable, biological balance and improves the water quality. Along with the appropriate pump (not included in the supply, please note the pond pump´s maximum volume capacity), this ensures for clear water, thus creating healthy surroundings for the pond inhabitants. Operation pressure pond filters with integrated UV unit are the combination of biological and mechanical filtration and contribute to the effectiveness by a UV-c pond clarifier. Due to their UV radiation, UVC pond clarifiers alternate the algae proteins´ tertiary and quaternary structure which causes their destruction. The algae’s clump, thus forming large parts of particles that can be easily removed from the water circulation by the mechanical pond filtration of the pond filter. During the bio-mechanical cleaning microorganisms accumulate inside the filter and remove germs and bacteria from the water. By the way of mechanical filtration, floating particles and dirt remain in the pond filter and do not return into the pond water.
Product Features
- Biological and mechanical filter chambers for more efficient removal of dissolved and solid waste
- Simple quick handle cleaning system for easy maintenance (no need to open and clean foams all the time)
- Enables rapid growth of aerobic bacteria resulting in removal of lethal ammonia and nitrite
- Able to cope with higher water flows compared to traditional gravity filters
- Complete with inlet and outlet hose adapters.Outlet/Inlet hose adapter
3/4 inches~5/4 inches
Make sure they come with the right size adapter to fit your hose
Once installed I would check each day to see if I had wasted my money on another contraption that doesn’t work I can’t speak for durability as it has been in service less than a month. But I can say that it works. My pond is small about 800 gallons but so muddy looking that you couldn’t see the goldfish. Once installed I would check each day to see if I had wasted my money on another contraption that doesn’t work. About the third day I noticed I could see a few inches down and began to spot my goldfish. Each day it got clearer and clearer and within a week I could see the bottom. Now my pond is so…
No More Algae! I have an 80 gallon pond for my 18 year old red-eared slider, Miss Emily. During the hot Phoenix summers, the algae grows very quickly. I was having to drain and clean her pond every two weeks because the water looked like green pea soup! I have tried algae chemical and barley grass bundles, neither worked. I have had this filter for two weeks now and the water is very clear! There are no signs of algae. I bought the 3/4 inch pond hose and used my existing submersible pump from my old filter…
Comments are disabled for this post.