Specificatio
Solar Panel: 5.5V 1.6W
Panel dimension: 135(L) x 85(W) mm
Battery: 3.7V 1500-1600 mAh
Charging protection: over charging, over discharging, over current, short circuit.
Light source: 46 pcs SMD 3020
Rated power: 2.5W
Lighting color: white
Color Temperature: 6000k
Beam angle: 160°
Senor-motivated area: 120° within 6M
Recommended installation height: >2.2M
Work temperature: -25℃ – 65℃
Protection Level: IP65
Product dimension: 180(L) x 125(W) x 30(H) mm
weight: 265g
Package
1 x Solar light
1 x Wall mount
2 x Screw
2 x Expansion pillar-hinge with srew
1 x Switch Pin
1 x color box
1 x User Mannual
Product Features
- Built-in 3.5mm Acrylic Light-conductive Panel, bright and soft lighting emitting.
- Intellgently identify daytime or night, automatically lighting when CDS found weak lighting around.
- Turn to dim lighting 10 seconds later when people leave,stay high lighting when movement detected.
- Built-in 1500 mAh Battery, will be full-charged within 7 – 8 hours and work for more than 15 hours
- Intelligent charging protection: avoid over charging, over discharging, over current, short circuit.
Excellent Solar PIR Light 0
one flaw (so far), but otherwise pretty nice The light arrived today. The solar panel itself is bigger than I expected (good) and it appears well-sealed in the housing. I gave it a quick test (let it charge a bit, turned it on using the included pin, then put it in a closet) and it worked. As with all these panels it’s necessary to seal all possible places weather can enter. There are about 10 screw holes I didn’t trust to be waterproof, and a gap between the upper half (aluminum) and lower half (plastic). I also ran sealant around the…
Comments are disabled for this post.