Tetra 1 1/4 in ID Pond Tubing easily connects to pumps, bio-filters, UV clarifiers, waterfall filters and other water features. Tubing will not crimp or collapse and can be buried to conceal.
Product Features
- Connects to pumps, bio-filters, UV clarifiers, waterfall filters and other water features
- Will not crimp or collapse
- Can be buried to conceal
- 1 1/4 inch diameter by 20 foot length
){kind=link}
Not worth the time or money Bought this tubing for a new, bigger pond pump for my granddaughter’s memorial pond. Not the same thickness as the previous tubing and slightly bigger in diameter than it says. It is very thin and when I tightened a clamp to hold it to the pump it started to leak. Checked the connection and found that the clamp had cut the tubing. So I tried it again but to clamp it tight enough to hold it on the pump cut the tubing again. I cut that piece off then noticed that there were several little pin…
Splits I’ve installed and used several tetra pond products for my fish ponds over the last three years. From my tiny 250 gallon pond at my old house to soon-to-be upgraded 500 gallon fish pond at my new home, TetraPond products are ubiquitous, but IMHO not worth the money for even the slightly serious pond-keeper. They are expensive (for the quality) and simply do not hold up.I’ve got two pumps in my pond, a 1″ and a 1-1/4′ (for my bio filter and high-speed for the waterfall). The…
Comments are disabled for this post.