')){kind=link}
Keep up with weather conditions in style with the Taylor Precision Products Heritage Metal Dial Thermometer (4.25-Inch). Measure temperature indoors or out with this traditionally styled metal dial thermometer. Featuring weatherproof construction and an included mounting bracket, this metal dial thermometer makes a functional and decorative accent to a backyard or garage. Easy-to-read fonts indicate the current temperature in Fahrenheit and Celsius with ranges from 40 degrees to 120 degrees F and -40 degrees to 50 degrees C. Part of the Taylor Heritage line of classically styled weather instruments, this thermometer is made of anodized aluminum and glass with a bronze finish and a decorative copper pointer. This dial thermometer comes with Taylor’s 1-year warranty.
Product Features
- Measure temperature indoors or out with this traditionally styled metal dial thermometer.
- Featuring weatherproof construction and an included mounting bracket, this metal dial thermometer makes a functional and decorative accent to a backyard or garage.
- Easy-to-read fonts indicate the current temperature in Fahrenheit and Celsius with ranges from 40 degrees to 120 degrees F and -40 degrees to 50 degrees C.
- Part of the Taylor Heritage line of classically styled weather instruments, this thermometer is made of anodized aluminum and glass with a bronze finish and a decorative copper pointer.
- This dial thermometer comes with Taylor’s 1-year warranty.
Related posts:
Taylor Precision Products Big and Bold Dial Thermometer (13.25-Inch, Green)
Taylor Temperature/Humidity Gauge
Taylor Precision Products 6700 13.25 in dial thermometer
Taylor Precision Products Classic Instant Read Pocket Thermometer
Taylor Food Service Classic Series Large Dial Thermometer, Freezer-Refrigerator
Taylor 681 18-Inch Metal Thermometer
Attractive and Accurate This thermometer is good-looking and accurate. I compared it with a thermometer of known accuracy. The difference was only about a degree, which seemed acceptable.A few notes.I could not mount the unit as instructed because mounting requires removing one of the finials and running the center rod through the holes in the brackets. However, the finials were stuck fast and I could not remove them without risk of damage. As a workaround, I moved the brackets a little…
Taylor Precision Products Heritage Metal Dial Thermometer (4.25-Inch) Accurate, validated against two mercury filled secondary reference, calibrated from 0C to 50C and 0 to 70C respectively (0.5C accuracy); and also digital reference accurate to 0.02C. No deviation when measuring between 10F degrees and 66F ambient temperature (-12.2C to 18.9C). Thermometers were placed outdoors, under a north facing covered porch, no direct sunlight, eastern US. Measurements taken over five days. Thus far, as new, this thermometer is surprisingly accurate.In…
Nice big themometer that has limited placement options If you don’t like the angle of the support arm – tough. Sure, you can bend it a bit – or reverse it, but you are limited in placement. There are no instructions regarding calibrating the thermometer should it need it – and mine did. I figured out how to take it apart with a paper clip (there is a little hole at the bottom of the back that allows inserting the paperclip to push out the retaining ring and three holes on the back to insert the paperclip into to push out the dial). However, there…
Comments are disabled for this post.