Otdair Solar Deck Lights, 3 LED Solar Step Lights Outdoor Auto On/Off Stainless Steel Solar Stair Lights Waterproof Wireless Solar Powered Lights for Fence Patio Garden Pathway – White 12 Pack
jackgarden • 4 years ago
3 LED STEP LIGHTS
Product Features
【New version】 New version Solar step lights come with Larger elevation angle for Solar panels.Especially for capturing solar energy, have a good function. New version Solar step lights can saving almost 5% time for charging.Use sunlight more efficiently.Fully charge in 6 hours under sun.Can keep lighting for 6-8 hours.
【EASY TO INSTALL】 Solar Deck Lights are wireless. Don’t need to worry about the wire problem.Mount the screws on a wall or fence.Insert the hole position into the installed screws.
【Auto On/Off】 Solar Step lights have Light sensing.The light will turn on automatically at night and turn off at daytime.You don’t need to repeat the switch.
【Strong exterior structure】 Solar deck lights made of Solid stainless steel construction.Robust and reliable quality. IP44 come with good waterproof and dustproof.
【CUSTOMER SERVICE & WARRANTY】 Otdair provide quality after-sales customer service for solar wireless waterproof lights.If you are not satisfied with this project for any reason, please contact us and we will help you solve the problem in 24 hours.
Nice addition to the steps First of all, this is a DIY item but get ready to spend 2-3 hours on it.You will need a measuring tape, drill and screw driver and a hammer.Mark where you want to install these and make sure that the alignment is right and satisfactory to you. Then drill pilot holes 3 inches apart. You really have to be precise here.After that you just have to put the screws in and hang the lights. If the screws are not spaced exactly 3 inches and the error is few tenths of…
Good pathway/guide lights These are handy little guide lights as I just purchased these to assist people walking up the side of our house at night. The other motion sensor light is at the top of the staircase so I figure I’d bring some light to the bottom. The kit comes with all the mounting hardware and instructions, but i opted to just use velcro to mount it because these are super light. There is only one button on the back to turn them on and off and has a sensor to detect if it is dark enough to turn on or not…
Nice addition to the steps First of all, this is a DIY item but get ready to spend 2-3 hours on it.You will need a measuring tape, drill and screw driver and a hammer.Mark where you want to install these and make sure that the alignment is right and satisfactory to you. Then drill pilot holes 3 inches apart. You really have to be precise here.After that you just have to put the screws in and hang the lights. If the screws are not spaced exactly 3 inches and the error is few tenths of…
Good pathway/guide lights These are handy little guide lights as I just purchased these to assist people walking up the side of our house at night. The other motion sensor light is at the top of the staircase so I figure I’d bring some light to the bottom. The kit comes with all the mounting hardware and instructions, but i opted to just use velcro to mount it because these are super light. There is only one button on the back to turn them on and off and has a sensor to detect if it is dark enough to turn on or not…
Comments are disabled for this post.