The EcoPlus submersible pumps are quality products, designed using the very latestvtechnological developments. The pumps are suitable for use in hydroponic systems, ponds, aquariums, fountains and filter systems. The pumps have been developed on the basis of the so-called synchronous technology, whereby the electrical parts are fully encapsulated in epoxy resin.
The pumps have an economical, powerful and reliable motor. The entire series are suitable for installation on dry land for in-line use or submersibly into the water. The EcoPlus submersible pumps are equipped with a ceramic shaft and therefore also suitable for use in salt water.
Product Features
- 594 Gallons per hour; 35 watt motor
- Included fittings: two-.75″ Barbed x .75″ Threaded, two-.5″ Barbed x .75″ Threaded, .75″ Barbed x 1.25″ Threaded and Nozzle x .75″ Threaded
- Suitable for installation on dry land for in-line use or submersibly into the water
- Pre-wired 175 inch 120v power cord
- Suitable for use in hydroponic systems, ponds, fresh and saltwater aquariums, fountains and filter systems
Good Pond Pump I used this in my 400 gallon pond. So far it has worked very well. its well built and has a removable filter in the housing which can be cleaned and reused. It also comes with these fittings, two-.75″ Barbed x .75″ Threaded, two-.5″ Barbed x .75″ Threaded, .75″ Barbed x 1.25″ Threaded and Nozzle x .75″ Threaded. The Inlet is 1.25″ NPT and the outlet is .75″ NPT. The power cord is 120 volt and 175 inch. Max height is 7.8 feet and 594 GPH. It take 35 watts of power to run this pump…
Great pump 0
Comments are disabled for this post.