Features:
– Come with 3 different size nozzles which create different fountain patterns
– LED decor light for fountain can create amazing evening glow
– Great warranty, reliability and ultra-quiet operation in water
– Cable length about 6ft
Specifications:
– Voltage: 120V / 60Hz
– Power: 10W
– Extension Tube Length:4.9-9.1in / 12.5-23cm
– Max Flow Rate: 600L/H
– H-Max (Lift height):0-11.8in / 0-30cm
– LED: White
– Cable Length: 6ft / 1.9m
– Size: 12*8*7.5cm / 4.7*3.1*2.9in
– Weight:1.5Ib / 629g
Note:
– This pump has been evaluated for use with water only.
– Use a proper power source as indicated on the pump label.
– Keep the cord away from high temperatures or other heat sources. – Do not pump heated liquids.
– Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
– Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.
– Do not lift the pump by its power cord.
Package Included:
1 x Water Pump
1 x Accessories Set
1 x User Manual
Product Features
- 2 beautiful water patterns: blossom, mushroom shape fountain water pump decorate your pond
- Filter built inside: improve water quality, protect pumps from debris and extend pump lifespan
- Adjustable water flow control: you can rotate the nozzle to adjust water rate
- Telescopic tube: easy to adjust the spray height
- 6ft Power Cord: long enough to reach an outle
Amazing!! This exceeded my expectations. So so easy to install. I was worried the fountain would spray everywhere and would be too large for my container, but it’s perfect! (It looks like there is water all over but that’s just from me watering the flowers I planted). I used a glass container as the water reservoir for the pump/fountain, put the pump in and stuck that inside a pot, put soil and plants around the reservoir, and then added decorative rocks to hide the rim of the reservoir, protect the…
Great setup I’ve used several similar setups over the years for my 50 gallon pond. This one is very reasonably priced. It contains a pump, sponge filter, adjustable pole/spray attachments. You can disassemble the pump and filter to clean it every couple weeks. I like that it is elevated on “legs”. The different spray features are nice although the “fountain” sprays too far away for my pond. It sprays all the water outside of the pond. It would work better for a larger pond. So i use the…
Submersible pump The GBGS 10w 160GPM Submersible pump works just fine for my application. I like this pump for two reasons first of all is the fact it has the four legs that screw on and keeps the pump up off the bottom of the pond, this means longer times between cleanings of the pump.The other reason is the built in lighting, The light shows up the sprinkler or the cascade of the water at night. Well built pump and easy disassembly and assembly for cleaning.My second review Sept.5, 2017, I have just…
Comments are disabled for this post.