Electrical Characteristics:

Solar Panel: 5.5V 120mA 17% efficiency

Battery: 3.7V 1200mAh lithium 18650 battery

Light source: SMD 2835*36pcs

Voltage: 3.7V

Electricity: 330mA

Wattage: 1.2W(ON),0.04W(dimlight)

LED power: 6500K-7000K 280Lumens

Motion Angle: 120°

Distance: 3-8(normal 4M)

High Light Delay: 30 seconds

Lightning Mode: OFF/DIM Light/Hight Light

Sensor: PIR motion sensor & lighting Sensor

Product Features:

1.Integrated design of PIR motions sensor and night sensor

2.Recharges via Solar Panel

3.Over 12 Hours lighting time from one day of charge

4.Waterproof IP 65,heat proof and durable

5.Intelligent energy-saving

Test Method:

1.Unlock the product,the light will last for 5s,then off.(this design is in order to test the product whether working)

2.Charge the light by direct sunlight around 8hrs.

3.Cover the solar panel with your hand.If the light is on,the product is working.

Working Process Instructions:

Step 1: Screw the holder on the wall and install the device on the holder

Step 2: Unlock the light system by clicking the “on/off “switch.

Step 3: Charge the device under direct sunlight for 8 hours.

Step 4: At night or in darkness,the light will auto turn ON once motion is detected by the PIR motion sensor within 4-8m/13-26ft.

Step 5: When no movement is detected within the sensing area for 30 seconds, the light will turn to dim light to save power.

Product Features

  • 5.5V solar charging panel, improve charging efficiency, energy saving and automatic shutdown: the solar motion sensor light is automatically turned off, charging during the day, and automatically lighting at night. 1200mAh capacity battery long working time: 60 hours continuous operation, larger panel, capacity 1200mAh, charging faster also in the case of less sunlight.
  • Lighting mode: 120° motion angle,PIR motion sensor and night sensor + OFF/Dim light/High light (distance 3-8m,normal 4m); pure natural light source, low power consumption, high brightness.Hight light delay 20 seconds,Wattage:0.04W (dim light),1.2W (ON).
  • IP65 waterproof rating, waterproof and heat resistant: Two tightly sealed inner rings for rainy days. This led solar security motion sensor light is designed for use outdoor, IP 65 waterproof and ABS material can withstand rainy days.
  • Rotatable fittings, multi-angle mounting, easy to install: this outdoor motion sensor solar pole light can be mounted directly on the wall, including screws, or use a pole to extend from the eaves for maximum solar energy, and the columns are screwed so you can rotate in any way you want.
  • 36 Super bright LEDs: SMD 2835*36 LEDs designed to provide ultra-high brightness illumination for a wide area.Brighter than other similar solar motion sensor lights.Great outdoor solar security motion sensor light for your garden, yard, aisle, porch, patio, or driveway etc..

Share Button