Tips:
US Standard Plug is included in the package,which is only suitable for the US, Canada and Mexico
Homasy Submersible Water Pump
for Water Fountains, Aquarium, Fish Tank, Ponds, Hydroponics (60W, 920GPH)
Create Water Currents
Add some circulation to your tank and give your lovely fish a perfect living environment. This submersible water pump can create water current, ideal for large-sized aquariums, ponds, water gardens, and desktop water fountains.
Higher Power, Higher Flow Rate
Using 60w high efficiency motor, this submersible water pump can create 920GPH (max) water flow while many other 60w pumps only produce 800GPH
Longer Cable, Easy Installation
The power cable is about 5.9ft (compared with 1.3ft), which is long enough for easy installation. Come with four suction-cup feet so you can stick it on the aquarium for stable installation
There are so many options, why Choose Us
1. All Our Products are Produced under Strict Quality Inspection
2. 12-Month Worry-Free Warranty and Free Life-time Technical Support
3. Professional After-Sales Team to Make Things Right within 24hrs
Specification:
Max Flow Rate: 920 GPH
H-Max: 9.8ft
Power: 60W
Length of power cord: 5.9ft
Water Tank Height Range:1-1.5m
Capacity: 220-330L
Package Included:
1* 60w Water Pump
2* Nozzles
Note
1.Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan.
2.Prohibit no-load running. Put the pump into water first before connecting power supply. When changing water, please disconnect power supply. It would shorten its lifespan and lead to making loud noises when running in the air for long time.
3.If the product suddenly stop working or make noises, which may caused by debris blockage. Please clean it regularly about once every two months, or add some olive oil on the rotor.
4.The rotor is applied with lubricant before installing but the running water would wash it away, and then the motor would make loud noises when running. It is advisable to apply lubricant when the motor makes loud noises.
5.Please note if the water level, layout of the water tank match the bump power before purchasing. If the water is too little, motor power is too high, so as the water flow level, the swashing water would make loud noises. Different bump suits different water tank. `
6.The maximum flow rate is 920GPH; there might be a plus-minus tolerance, Insufficient power and insufficient frequency would affect the flow rate.If connected with a water pipe, the maximum flow rate would less than 920GPH. If the water sprays out the container, the flow rate would also less than 920GPH
7.Two different sizes nozzles are provided. If you use the smaller one, the maximum flow rate would less than 920GPH
Product Features
- Strong Power and High Flow. Maximum flow rate: 920GPH. 60W high quality motor offers higher water flow, but it will not produce much noise. Ideal for large-sized aquariums, ponds and water gardens etc
- Higher Lift. Max Lift Height: 9.8ft. 60W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
- Ultra Quiet Design Come with 2 Nozzles (0.51in and 0.75in). High quality motor provides a quiet environment for you. Threaded fittings make it more stable. The impeller shaft is stainless steel for long life span and corrosion resistance
- 5.9ft Longer Power Cord, Simple to install. Coming with 4 strong suction-cups help keep it in place for reliable set-up, so you can stick it on the right side of the aquarium, either vertically or horizontally
- Welfare for Your Fish. Circulate and aerate the water, making it more attractive to your fish or turtles, offering them a near-natural living environment. Backed by 12-month warranty and professional after-sale service within 24hrs
Loud and noisy I bought this for my bio pellet reactor, which needed a strong pump. Other pumps of a similar turnover rate was much more expensive, so I bought this to save some money.When I got it, I found that it was bigger than the dimensions that they put in the product description, so I had to modify it by removing the suction cup legs. I put this pump in my tank and it worked silently for a night. After two days, it started making a loud noise, like it was having a hard time pumping water. I…
Revised The first pump I ordered had a small hole approximately 2mm in diameter where the pump housing and the threaded outflow section meet. The hole was on the jointed seam, which appeared to be an incomplete fill in the mold and missed QC. The pump was still operational only that there was a small amount of outflow through the hole. After repairing the hole with epoxy and allowing to cure for a few days the pump worked for approximately 3 months of continuous use. After discovering that the pump had…
Look forward to using it in the summer when the ground water isn’t cool enough to easily cool wort to under 80 degrees
Comments are disabled for this post.