Features:
– Plug and play design, easy to use
– Dual relay output, be able to connect with refrigeration and heating equipment at the same time
– Support reading with Centigrade or Fahrenheit unit
– Maximum output load: 1100W(110V)
– Dual display window, be able to display measured temperature and set temperature at the same time
– Temperature calibration
– Compressor delay protection for refrigeration control
– High and low temperature alarms are available
– Over-temperature and sensor fault alarm
– Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Note:
This listing sensor’s probe dimension is 50mm x 6mm.
If you want 12″ probe sensor, you can search on Amazon and buy one by ASIN: B01A6DIPFM or ASIN: B01A51OLR6.
Product Features
- 👍👍[Convenient Design] Plug and play, easy to use.
- 👍👍[Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- 👍👍[Safe] Maximum output load: 1100W(110V).
- 👍👍[Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- 👍👍[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
Great Product, if only the quality was better I have a total of 4 of these units, which we use to control the temperature in a chick box. The controllers work great until they don’t. Of my 4, 2 have failed in recent weeks.The failures seem to be linked to poor quality relays. When the unit switches over to cooling once the limit is hit the heating relay sticks and doesn’t turn off the heating system, it just continues to heat with the cooling system light on. This leads to over temperature which in our case causes dead…
Simple set up easy to use and reliable
Comments are disabled for this post.