Powered by solar energy, the solar motion sensor light is a perfect companion for Patio, Deck, Yard, Garden, Home, Driveway, Stairs, Outside Wall as a security light or light up a pathway as an approach light.
Great motion sensor
With PIR motion sensor and night sensor, it will turn dim light on automatically at night and turn to high light when people coming. Turn to dim light again when people moves away.
Energy Saving
Install the light where the panel can get full sunlight and turn the switch on. It will turn the light on automatically at night and be off during the day.
High Brightness
With 16pcs SMT LED, the solar wall light is very bright, which has the same amount of light as a 60w incandescent light. The total brightness is about 320lm.
Easy Installation
With included screws, it is easy for you to set up without any trouble.
Specification:
Solar panel :5.5v 0.6w polysilicon solar panel
Battery: 3.7v 2200mah lithium battery
LED power:1W
High light delay:30s
Waterproof Rate:IP65
Lumen: 320lm
Charging time: 8hours
Working time: 12hours
Sensor Distance: 3-5 meters
Sensor Angle: 120 Degree
Note:
1. The performance of the solar light depends on the geographical location, weather conditions and seasons.
2. Please fully charge the device before first use.
Package Included:
1*solar sensor wall light
2*screws
2* Plastic Anchors
Product Features
- Powerful 16 LED lamps. The solar sensor wall light adopted 16pcs led and its brightness is up to 320lm. It’s approximately the same amount of light as you get with an incandescent light which power is 60watt.
- Motion Sensor. Integrated the design of PIR motion sensor and night sensor, it will auto turn on dim light when in darkness or at night, and auto turn off when in daytime or bright area. It will enter into high light mode when people come and stay for 30s after motion stops and then turn to dim light to save energy.
- High Performance. It uses polysilicon solar panel whose light conversion efficiency is up to 17%. Waterproof, freeze-protection and sun block design offers you durability. External waterproof switch, instead of pinhole switch, makes operation easily.
- Long Working Time. Built-in 2200mAh replaceable 18650 lithium batteries, it only needs 8hours to be fully charged and can last for 12hours working time. Let the solar panel get enough sunshine during the day and it will turn on automatically at night to act as a security light.
- Protection Design. The circuit board is coated with 3-resisting lacquer, which is insulated, damp proof, shockproof, dustproof, corrosion proof, anti-aging and anti-creeping. The back side of the solar light is sealed without hollow so it can effectively isolate the water and air.
Small but packs a powerful shine http://www.amazon.com/gp/product/b018l9duto?redirect=true&ref_=cm_cr_ryp_prd_ttl_sol_0Do not let the size fool you, although this light it is amazingly bright. I have a hallway where I would need to walk down to turn on the lights which rather defeat it’s purpose since common sense would be to have the switch at the beginning of the hall not at the end…Homes were constructed this way in the past I suppose, so I picked up a different type of motion sensor light to attach onto…
Bright light. Works great. This is a bright little light for sure.What I like about this light is it goes on and stays on when it gets dark, but when it detects motion it gets brighter, so this is great for pathways because you can see where you want to go, and then see where you are going once you get there.There is an on/off switch if you want to decide not to have it light at all, which is good if you want it dark, or want to conserve the energy stored for some reason, I like to be able to turn…
Comments are disabled for this post.