Smartsense is a motion sensing LED light bulb that provides hands-free lighting for security and convenience in and around your home.
During normal operation, Smartsense turns on when the sensor detects motion from a person or a car within 30 feet and remains lit for 90seconds. If movement persists, Smartsense remains lit.
The bulb also supports an “Always On” mode — by quickly switching the bulb off and on, once, you can temporarily deactivate the sensor and use the bulb as a standard LED light A19.Energy efficient long-lasting LED with 25,000 hours expected use.
Product Features
- Easy to install, easy to use: transform your indoor fixtures into motion-activated lights without any extra hardware. No extra wiring or app required.
- Built in motion sensor: using the integrated sensor, the light will automatically illuminate when motion is detected within 30 feet.
- 90 seconds of light: the light remains illuminated for 90 seconds after motion is detected.
- Use as an everyday bulb: when light switch is on, the bulb will illiminate by sensing motion. Or deactivate the motion sensor temporarily by flipping the switch quickly on and off.
- Long lasting: LED bulb rated to last 25,000 hours, using only 0.2W of energy while in standby.
Great product and perfect for my application
I bought these LED bulbs for the garage ceiling lights …
Low standby power, adequate detection angle, works great and inexpensive Fails on slow power up when there’s a power restore I found this after getting First Alert motion detector socket to use for automating my pantry light.Several problems with the First Alert – detection angle was sideways not down and did not detect entry. The I found that it drew 4 Watts all the time, to try and save 9 W on the bulb… And it was something like $18.Then I got one of these. The detection cone is down – ideal for a tall closet. And it only cost $10, about 1/3 of a LED bulb and a motion detector separately. Finally, it…
Comments are disabled for this post.